BODY STRUCTURE


  1. CONSTRUCTION


    1. A hood insulator is provided on the rear of the hood panel. Provision of air layers achieves excellent sound insulation performance.

      A019QVZC01
      *1 Hood Insulator *2 Hood Inner Panel
      *3 Hood Panel - -
      *a A - A Cross Section *b Air Layer

    2. A dash panel insulator outer is provided. This reduces the engine noise leaking into and out of the cabin.

      A019QMSC01
      *1 Dash Panel Insulator Outer - -

    3. A dash panel insulator is provided. This insulates and absorbs the engine noise to reduce the engine noise leaking into the cabin.

      A019QTVC01
      *1 Dash Panel Insulator - -

    4. To reduce the amount of road noise, engine noise, and droning sound that enter the cabin, the floor panels are coated with floor silencers.

      A019R41
      A019QFI Floor Silencer - -

    5. All the locations of sound insulation and absorption materials in the cabin have been optimized, creating a quiet drive.

      A019QN0C01
      *1 Roof Headlining and Silencer *2 Front Pillar
      *3 Front Door Lower Frame Bracket Garnish *4 Center Pillar
      *5 Quarter Trim and Silencer *6 Cowl Side Trim and Silencer
      *7 Front Door Trim and Silencer *8 Rear Door Trim and Silencer
      *9 Deck Side Trim and Silencer *10 Floor Carpet and Silencer
      *11 Rear Floor Carpet and Silencer - -
      *a Velour (Needle-punched Nonwoven) *b Insulation Layer
      *c Absorption Layer - -

    6. A foam type sound insulation material is used in the body frame profile, reducing the various noises which intrude from the outside of the vehicle to the inside of the cabin.

      A019QV8C01
      *1 Foamed Material *2 Solid Foamed Material
      *a A - A Cross Section *b B - B Cross Section
      *c C - C Cross Section *d D - D Cross Section
      *e E - E Cross Section *f F - F Cross Section
      *g G - G Cross Section *H H - H Cross Section

    7. An acoustic layer laminated windshield is provided to reduce the engine noise and road noise intruding into the cabin.

    8. A reduction in level differences in the windshield glass molding and the rain gutter molding enhances wind noise reduction.

      A019QNOC01
      *1 Windshield Glass *2 Windshield Molding Outside
      *3 Roof Panel *4 Rain Gutter Molding
      *a A - A Cross Section *b Acoustic Layer
      *c Minimal Level Difference - -

    9. A front bumper cover lower is provided and the underfloor airflow is adjusted to enhance wind noise reduction.

      A019QPFC01
      *1 Front Bumper Cover Lower - -
      *a A - A Cross Section - -