SLIDING ROOF SYSTEM


  1. OUTLINE


    1. The sliding roof system uses a single glass panel to perform the tilt up-and-down and slide open-and-close operations.

    2. The sliding roof ECU controls the sliding roof system. This ECU uses 2 Hall ICs to detect the position of the sliding roof. The sliding roof ECU and the 2 Hall ICs are integrated in the sliding roof drive gear sub-assembly.

  2. PRECOUSTION


    1. The sliding roof ECU memorizes the initial position of the sliding roof. This memory is not cleared if the battery terminals are disconnected. However, initialization is necessary after the sliding roof drive gear sub-assembly has been replaced.