ENTRY AND START SYSTEM


  1. CONSTRUCTION


    1. The engine switch consists of a momentary type switch, 2 color (amber, green) Light Emitting Diodes (LEDs), and a transponder key amplifier.

    2. The amber and green LEDs are used for the indicator light.

    3. The driver can check the present power source mode and whether the engine can start or not by looking at the indicator light.

    4. When the power management control ECU detects an abnormality in the start system while the engine is running, the amber indicator light will flash. If the engine is stopped in this state, restarting may not be possible.

      A019R0ME02
      Power Source Mode/Condition Indicator Light Condition
      Brake pedal not depressed Brake pedal depressed with shift lever in P or N
      Off Turns off Turns on (Green)
      On (ACC), On (IG) Turns on (Amber) Turns on (Green)
      Engine Running Turns off Turns off
      Steering Lock Not Unlocked Flashes (Green) for 15 seconds Flashes (Green) for 15 seconds
      Start System Malfunction Flashes (Amber) for 15 seconds Flashes (Amber) for 15 seconds