AUTOMATIC TRANSMISSION SYSTEM


  1. CONSTRUCTION


    1. An ATF filling procedure is used in order to improve the accuracy of the ATF level when the transmission is being repaired or replaced. As a result, the oil filler tube and the oil level gauge used in the conventional automatic transmission have been discontinued, eliminating the need to inspect the fluid level as a part of routine maintenance. For details about the ATF filling procedures, refer to the corresponding Repair Manual for this model.

    2. This filling procedure uses the refill plug, overflow plug, No. 2 ATF temperature sensor and shift position indicator D.

    3. ATF filling procedures are different between the models with an air-cooled type ATF cooler and the models without an air-cooled type ATF cooler.

      A019QYCC01
      *1 Refill Plug *2 Overflow Plug
      *a Proper Level - -