LUBRICATION SYSTEM


  1. CONSTRUCTION


    1. A compact cycloid rotor type oil pump directly driven by the crankshaft is used.

    2. This oil pump uses an internal relief method which circulates relief oil to the suction passage in the oil pump. This aims to minimize oil level change in the oil pan, reduce friction, and reduce the air mixing rate in the oil.

      A019QKPC01
      *1 Timing Chain Cover *2 Oil Pump Rotor
      *3 Oil Pump Cover - -
      *a Oil Passage in Oil Pump *b To Cylinder Block
      *c From Oil Filter *d To Oil Filter
      *e Relief Oil *f From Oil Strainer