ENGINE UNIT


  1. OUTLINE


    1. The 1GR-FE engine is a V-type, 6-cylinder, 4.0-liter, 24-valve DOHC engine.

    2. On this engine, the Dual Variable Valve Timing-intelligent (Dual VVT-i) system and Electronic Throttle Control System-intelligent (ETCS-i) are used. These control functions have been optimized to further improve engine performance and fuel economy, and to reduce exhaust emissions.

      A019QDH

  2. SPECIFICATION

    No. of Cyls. and Arrangement 6-cylinder, V-type
    Valve Mechanism 24-valve DOHC, Chain Drive (with Dual VVT-i)
    Combustion Chamber Pentroof Type
    Manifolds Cross-flow
    Fuel System Sequential Multiport Fuel Injection (SFI)
    Ignition System Direct Ignition System (DIS)
    Displacement

    3956 cm3(241.4 cu. in.)
    Bore x Stroke 94.0 mm x 95.0 mm (3.70 in. x 3.74 in.)
    Compression Ratio 10.4 : 1
    Max. Output [ECE-NET] 202 kW @ 5600 rpm
    Max. Torque [ECE-NET] 381 N*m @ 4400 rpm
    Valve Timing Intake Open -11° to 29° BTDC
    Closed 71° to 31° ABDC
    Exhaust Open 60° to 25° BBDC
    Closed 4° to 39° ATDC
    Spark Plug Manufacturer DENSO
    Type SK16HR11
    SK20HR11
    Plug Gap 1.0 mm to 1.1 mm (0.0394 in. to 0.0433 in.)
    Firing Order 1 - 2 - 3 - 4 - 5 - 6
    Research Octane Number 95 or higher*2
    Emission Regulation CHINA EURO 5
    Engine Service Mass (Reference)*1 189.0 kg (416.7 lb)

    Tech Tips

    *1: Weight shows the figure with oil and coolant fully filled.

    *2: Premium unleaded gasoline with a research octane number 95 or higher required for optimum engine performance. If 95 octane cannot be obtained, you may use unleaded gasoline with a research octane number as low as 91. Use of unleaded fuel with a research octane number lower than 95 may result in engine knocking and significantly reduced performance. Persistent knocking can lead to engine damage and should be corrected by refueling with higher octane unleaded gasoline.

    Note

    When replacing a spark plug, replace it with the same type of spark plug that is installed on the vehicle.

    A019QPGE02

  3. MAIN FEATURES


    1. This engine has been able to achieve the following performance through the use of the items listed below:


      1. High performance and fuel economy

      2. Low noise and vibration

      3. Lightweight and compact design

      4. Good serviceability

      5. Clean emissions

        Item (1) (2) (3) (4) (5)
        Engine Proper An upright intake port is used. ○ - ○ - -
        A taper squish shape is used for the combustion chamber. ○ - - - ○
        A steel-laminate type cylinder head gasket is used. ○ - - - -
        Spiny-type liners are used in the cylinder bores. ○ - ○ - -
        Cylinder block water jacket spacers are used. ○ - - - -
        The piston skirt is coated with resin. ○ ○ - - ○
        A No. 1 oil pan made of aluminum alloy is used. ○ ○ ○ - -
        Valve Mechanism Timing chains and chain tensioners are used. ○ - ○ - -
        Valve lash adjuster assemblies are used. ○ ○ - ○ ○
        Valve rocker arm sub-assemblies are used. ○ - - - ○
        Lubrication System An oil filter with a replaceable element is used. - - - ○ -
        A water-cooled type oil cooler is used. ○ - - - -
        Intake and Exhaust System An intake air surge tank made of plastic is used. - - ○ - -
        A linkless-type throttle body is used. - - ○ ○ -
        Three-Way Catalytic converters (TWCs) are used. - - - - ○
        Fuel System 12-hole type fuel injector assemblies are used to improve the atomization of fuel. ○ - - - ○
        Ignition System Long-reach type spark plugs are used. ○ - - - -
        Serpentine Belt Drive System A serpentine belt drive system is used. - - ○ ○ -
        Engine Control The Electronic Throttle Control System-intelligent (ETCS-i) is used. ○ - - - ○
        The Direct Ignition System (DIS) makes ignition timing adjustment unnecessary. ○ - - ○ ○
        The Dual Variable Valve Timing-intelligent (Dual VVT-i) system is used. ○ - - - ○