LIGHTING SYSTEM GENERAL


  1. OUTLINE


    1. Exterior Light


      1. The exterior lights are positioned to ensure visibility.

    2. LED Headlight System


      1. LED headlight system, capable of instantly flashing, and of ensuring a long service life, is used in the low beam headlight.

    3. Automatic Headlight Beam Level Control System


      1. When the headlights are on, the automatic headlight beam level control system operates the headlight leveling motor in accordance with movement of the vehicle.

        A01J7Q3

    4. Manual Headlight Beam Level Control System


      1. This system keeps the beam of the headlight adjusted to the appropriate level in accordance with the number (weight) of passengers and volume of luggage. The headlight beam level can be adjusted from 0 to 5 by operating the headlight leveling switch.

        A01J8AHE01
        Text in Illustration
        *1 Headlight Leveling Switch - -

    5. Automatic Light Control System


      1. When the light control switch is in the AUTO position, the automatic light control system detects ambient light levels and controls the headlights and taillights (clearance lights, taillights and license plate lights).

    6. Light Auto Turn-OFF System


      1. A light automatic turn-off system, which automatically turns off the headlights and front foglights if the power switch is turned off with the lights turned on, is used in order to prevent the battery from being discharged. When the light control switch is in the AUTO position, all exterior lights will be turned off.

    7. Daytime Running Light System


      1. The daytime running light system is designed to automatically illuminate the headlights (Low beam) and taillights, during the daytime to keep the vehicle highly visible to other vehicles.

    8. Light Reminder System


      1. When the driver door is opened with either the headlights or the taillights turned on when the power switch is turned off, the buzzer sounds to prevent the driver from forgetting to turn off the lights.

    9. Emergency Brake Signal


      1. An emergency brake signal is used. This function automatically flashes the stop lights in 4 Hz cycles during sudden braking, in order to alert vehicles behind and reduce the risk of an accident.

  2. MAJOR DIFFERENCE


    1. The new models have been modified from the previous models as shown below:


      1. The LED type headlight has been changed to a 2 projector type.

      2. The design of the taillight has been changed.

      3. The stop light switch has been changed to a non-contact (semiconductor) type.*

        *: Except Models for Australia

  3. SPECIFICATION

    Light Type Specification
    Headlight Unit High Beam (Reflector Type) Halogen Bulb 60 W
    Low Beam (Projector Type) Halogen Bulb 55 W
    Low Beam (LED Type)* Projector Type LED X 2 27.8 W
    Clearance Light Bulb 5 W
    Clearance Light* LED x 2 2.7 W
    Front Turn Signal Light Bulb 21 W
    Daytime Running Light LED x 4 8.9 W
    Front Fog Light Halogen Bulb 55 W
    Side Turn Signal Light Bulb 5 W
    Rear Combination Light Tail Light LED X 16 2 W
    Stop Light LED X 8 3.8 W
    Turn Signal Light Bulb 21 W
    Back-up Light Bulb 21 W
    Rear Fog Light Bulb 21 W
    Center Stop Light LED X 4 0.4 W
    License Plate Lights Bulb 5 W

    • *: Models with LED headlight system