SEAT ASSEMBLY DETAILS


  1. FUNCTION


    1. Power Lumbar Support


      1. The driver seat uses a 2-way adjustable lumbar support. This support includes a plastic basket that is to be placed in the lumbar area of the occupant, and which pushes the seatback forward, thus providing uniform support from the upper back down to the pelvis for a better fit.

        A01J7U4E01
        Text in Illustration
        *1 Seatback Frame *2 Plastic Basket
        *3 Front-back Adjustment - -

    2. Active Headrest


      1. Active headrests are provided, which move up and forward almost instantly in the event of a rear-end collision when the force of the occupant body is applied to the seat back and reduce the distance between the occupant's head and the headrest.

      2. The active headrest consists of the lower unit, cable and upper unit.

      3. When the lower unit built into the seat back is pressed by the occupant's lumbar as the occupant's body slides down during a rear-end collision, the cable is pulled and the headrest is moved up and forward by the upper unit, reducing the distance between the occupant's head and the headrest.

        A01J82UE01
        Text in Illustration
        *1 Headrest *2 Upper Unit
        *3 Cable *4 Lower Unit
        *5 Normal Position *6 Operating Position

    3. Manual Lifter


      1. The driver seat uses a manual lifter. The entire seat can be vertically moved by operating the pump type lifter knob on the outer surface of the driver seat cushion.

      2. The manual lifter consists of the pump type lifter knob, lifter gear and lifter rod, thus accommodating various body types.

        A01J8CBE01
        Text in Illustration
        *1 Lifter Rod *2 Lifter Gear
        *3 Lifter Knob - -

  2. CONSTRUCTION


    1. Front Seat


      1. Manually adjustable front seats have been provided.

      2. The front seat back has been scooped out and made slim to offer additional knee room for rear passengers.

        A01J81RE01
        Text in Illustration
        *a New Prius *b Conventional Models

    2. Rear Seat


      1. Foldable 60/40 separate type seats are provided as the rear seats.

      2. The suction port for the HV battery cooling blower is used on the right side of the rear seat.

        A01J820E01
        Text in Illustration
        *1 Suction Port - -

    3. Child Restraint System


      1. ISO-FIX bars for securing child seats have been provided behind the seat cushion of the rear seat.

      2. CRS anchor brackets for securing a child seat have been provided behind the rear seat backrest.

        A01J7WZE01
        Text in Illustration
        *1 ISO-FIX Bars *2 CRS Top Tether Anchor Bracket
        *3 CRS Top Tether Anchor Bracket (Only for Australia) - -