CAN COMMUNICATION SYSTEM GENERAL


  1. OUTLINE


    1. The HS (High Speed)-CAN with a communication speed of 500 kbps is used in the CAN communication system.

    2. The CAN has two terminating resistors of 120 Ω which are necessary for accurate judgment of communication on the main bus.

    3. The terminating resistors for the V bus are located in the ECM and the combination meter assembly.

    4. The terminating resistors for the power management bus are located in the ECM and the power management control ECU*1 / power source control ECU*2.

      *1: for models with 1KR-FE,1NR-FE Engine

      *2: for models with 1ND-TV Engine