INTAKE SYSTEM DETAILS

  1. CONSTRUCTION

    1. Air Intake System

      1. Inlet Air Cleaner

        • For changing headlight bulb easily, we designed the inlet air cleaner in 2 pieces.

      2. Air Cleaner Assembly

        • Same strength level as the previous model is kept because of proper design tuning.

      3. Air Cleaner Hose

        • We decrease the cost by adopting EPDM for oil resistance and keep performance same level as CR material.

    2. Throttle Body Assembly

      1. Precise control and excellent reliability is achieved by used an electric position sensor with a Hall IC. Engine response has also been improved.

      2. A DC motor that has good response and low electric power consumption is used.