CLUTCH SYSTEM GENERAL


  1. OUTLINE


    1. A dry type single plate clutch, which is operated by hydraulic pressure is used.

    2. A turnover mechanism, which reduces clutch pedal effort, is used on all models.

    3. A large torsional angle type clutch disc assembly is used in the models for Singapore, resulting in reducing drive line noise and vibration.

      A01KACSE01
      Text in Illustration
      *A Models for Dyna 100 for General Countries Except Singapore *B Models for Dyna 150 for General Countries Except Singapore
      *C Models for Singapore - -

  2. SPECIFICATION

    Destination General Countries Except Singapore Singapore
    Model Dyna 100/150 Dyna 100/150
    Clutch Type Dry Type Single Plate Clutch, Diaphragm Spring ←
    Operation Hydraulic ←
    Clutch Cover Assembly Installed Load N 4900 6375
    Clutch Disc Assembly Facing Size* mm (in.) 236 x 150 (9.29 x 5.91) 275 x 175 (10.83 x 6.89)
    Facing Area

    cm2(in.2)

    		 260.7 (40.40) 353.4 (54.90)
    Clutch Master Cylinder Assembly Type Conventional ←
    Cylinder Dia. mm (in.) 15.87 (0.62) ←
    Clutch Release Cylinder Assembly Type Non-adjustable ←
    Cylinder Dia. mm (in.) 20.64 (0.81) 19.05 (0.75)

    • *: Outer Diameter x Inner Diameter