CLUTCH SYSTEM GENERAL


  1. OUTLINE


    1. A dry-type single plate clutch, which is operated by hydraulic pressure is used.

    2. A turnover mechanism, which reduces clutch pedal effort, is used on the all models.

    3. A large torsional angle type clutch disc is used in Dyna 150 for Europe, resulting in reducing drive line noise and vibration.

      A01KAISE01
      Text in Illustration
      *A for General Countries *B Dyna 100 for Europe
      *C Dyna 150 for Europe - -

  2. SPECIFICATION

    General Countries
    Model Dyna 100/150
    Clutch Type Dry Type Single Plate Clutch, Diaphragm Spring
    Operation Hydraulic
    Clutch Cover Type DST*1
    Size mm (in.) 236 (9.29)
    Installed Load N 4900
    Clutch Disc Facing Size*2 mm (in.) 236 x 150 x 3.5 (9.29 x 5.91 x 0.14)
    Facing Area

    cm2(in.2)

    		 260 (40.30)
    Master Cylinder Type Conventional
    Cylinder Dia. mm (in.) 15.87 (0.62)
    Release Cylinder Type Non-adjustable
    Cylinder Dia. mm (in.) 20.64 (0.81)

    • *1: DST (Diaphragm Spring Turnover)

    • *2: Outer Diameter x Inner Diameter x Thickness

    Europe
    Model Dyna 100 Dyna 150
    Clutch Type Dry Type Single Plate Clutch, Diaphragm Spring ←
    Operation Hydraulic ←
    Clutch Cover Type DST*1 ←
    Size mm (in.) 236 (9.29) 260 (10.24)
    Installed Load N 4900 6370
    Clutch Disc Facing Size*2 mm (in.) 236 x 150 x 3.5 (9.29 x 5.91 x 0.14) 260 x 170 x 3.5 (10.24 x 6.69 x 0.14)
    Facing Area

    cm2(in.2)

    		 260 (40.30) 304 (47.12)
    Master Cylinder Type Conventional ←
    Cylinder Dia. mm (in.) 15.87 (0.62) ←
    Release Cylinder Type Non-adjustable ←
    Cylinder Dia. mm (in.) 20.64 (0.81) ←

    • *1: DST (Diaphragm Spring Turnover)

    • *2: Outer Diameter x Inner Diameter x Thickness