FEATURES PERFORMANCE


  1. OUTLINE


    1. Concept

      A01KAG8E01

    2. 1KD-FTV Engine


      1. The 1KD-FTV TOYOTA D-4D (Direct Injection, 4-stroke Common-rail Diesel Engine) is a 3.0-liter, inline 4-cylinder, 16-valve DOHC with intercooler turbocharged diesel engine.

        Item Specification
        No. of Cyls. and Arrangement 4-Cylinder, In-line
        Valve Mechanism 16 Valve, DOHC, Belt and Gear Drive
        Displacement

        2982 cm3(182.0 cu.in.)
        Bore x Stroke 96.0 mm x 103.0 mm (3.78 in. x 4.06 in.)
        Max. Output (EEC) 106 kW @ 3400 rpm
        Max. Torque (EEC) 300 N*m @ 1200-3200 rpm
        A01KAIJ

    3. 5L Engine


      1. The engine has been changed from the 3L engine (2.8L) that was used on the previous Dyna 100/150 to the 5L engine (3.0L) that provides more torque through increased cylinder displacement.

      2. Based on the 3L engine, the 5L engine offers greater torque, better fuel economy, and lower exhaust emissions by improving combustion. Efficiency and tuning the fuel injection timing to an optimal level.

        Item Specification
        No. of Cyls. and Arrangement 4-Cylinder, In-line
        Valve Mechanism 8-Valve, OHC, Belt Drive
        Displacement

        2986 cm3(182.2 cu. in.)
        Bore x Stroke 99.5 mm x 96.0 mm (3.92 in. x 3.78 in.)
        Max. Output (EEC) 66 kW @ 4000 rpm (65 kW @ 3600 rpm)*
        Max. Torque (EEC) 192 N*m @ 2400 rpm (192 N*m @ 2400-2800 rpm)*

        • *: Singapore only

        A01KA59

    4. G54 Manual Transmission


      1. A G54 5-speed manual transmission is used on the Dyna 100 except for Europe.

        Item Specification
        Gear Ratio 1st 4.452
        2nd 2.398
        3rd 1.414
        4th 1.000
        5th 0.802
        Reverse 4.472

    5. R351 Manual Transmission


      1. A R351 5-speed manual transmission is used on the Dyna 100 for Europe.

        Item Specification
        Gear Ratio 1st 4.313
        2nd 2.330
        3rd 1.436
        4th 1.000
        5th 0.838
        Reverse 4.220

    6. R451 Manual Transmission


      1. A R451 5-speed manual transmission is used on the Dyna 150 for Europe and all models for Singapore.

        Item Specification
        Gear Ratio 1st 4.313
        2nd 2.330
        3rd 1.436
        4th 1.000
        5th 0.838
        Reverse 4.220

    7. R452 Manual Transmission


      1. A R452 5-speed manual transmission is used on the Dyna 150 except for Europe.

        Item Specification
        Gear Ratio 1st 5.146
        2nd 2.780
        3rd 1.509
        4th 1.000
        5th 0.830
        Reverse 5.035

    8. Suspension


      1. An independent front suspension has been used on the model for Europe and Singapore.

      2. A leaf spring rigid front suspension has been used on the model for general countries.

      3. A leaf spring rigid rear suspension has been used on all models.

        A01KAE6E01
        Text in Illustration
        *A Models for Europe *B Models for Singapore
        *C Models for General Countries - -

    9. Steering Wheel


      1. A 2-spoke steering wheel is used to improve the visibility of the combination meter.

      2. A steering wheel with an SRS airbag is optionally available only on the driver's side for Europe.

      3. The steering wheel made of polypropylene is for general countries, and urethane is for Singapore.

      4. The steering wheel for Europe is made of urethane and has a steering wheel pad with an EA (Energy Absorbing) feature.

        A01KA9OE01
        Text in Illustration
        *A Models with SRS Airbag for Europe *B

        • Models without SRS Airbag for Europe

        • All Models for Singapore
        *C Models for General Countries except Singapore - -

      5. The installation angle of the steering wheel has been changed to achieve an optimal driving position thus improving drivability and comfort.

        A01KA95E01
        Text in Illustration
        *a New Model *b Previous Model

    10. Steering Column


      1. The fixed type steering column is for general countries and the tilt-and-telescopic steering column is for Europe Singapore.

        A01KAFEE01
        Text in Illustration
        *a 8.2°Compared to Previous (+1.8°) *b 35 mm Compared to Previous (+5 mm)
        *c Tilt-and Telescopic Lever - -

    11. Brake


      1. Ventilated disc brakes have been used for the front and drum brakes for the rear on all models.

      2. An in-wheel parking brake has been used on the Dyna 100.

      3. A center parking brake has been used on the Dyna 150.

      4. A floor type parking brake lever has been incorporated for improved ease of use.

    12. ABS


      1. The ABS (Anti-lock Brake System) is provided on European models only. The short wheel base, complete model of the Dyna 100 is equipped with it as standard, and for the other European models, it is available as an option.

      2. The ABS (Anti-lock Brake System) which prevent wheel locking during emergency braking, thus contributing to helping maintain vehicle behavior and steering performance has been adopted. This functions make it possible to ensure the excellent braking performance.

        A01KAE8E01
        Text in Illustration
        *a Vehicle with ABS *b Vehicle without ABS
        *c Starting the Brake Application *d Conceptual Drawing

    13. Cab


      1. Ample cabin space has been achieved by increasing front head clearance (a) and the front pillar angle (b), thus achieving improved ergonomics.

      2. (c) The opening angle of the door hinges and the opening area of the door have been increased to make it easier to get in and out.

      3. (e) The European single-cabin model is provided with a tilt mechanism to ensure access for servicing the vehicle.

      4. (d) The stepping area of the front step has been increased to make it easier to get in and out.

        A01KA6KE01

    14. Deck


      1. A steel deck comes on all complete models.

      2. The header board has been kept from protruding out into the bed area, allowing it to lay flat, resulting in improved use of the bed.

        A01KA82E01
        Text in Illustration
        *A Single Cab Model *B Double Cab Model
        *a

        • Short: 2850 mm (112.2 in.)

        • Long: 3110 mm (122.4 in.)

        		 *b 1600 mm (63.0 in.)
        *c 2100 mm (82.7 in.) *d The header board has been kept from protruding out into the bed area, allowing it to lay flat, resulting in improved use of the bed.

    15. Frame


      1. The frames have been designed exclusively for the IFS (Independent Front Suspension) model and the RFS (Rigid Front Suspension) model.

        Destination Front Suspension Type Deck Type Wheel Base
        Europe Independent Steel High Deck Shot (2300 mm)
        Long (2545 mm)
        Extra Long (3350 mm)
        Super Long (3750 mm)
        General Countries Singapore Other Rigid Steel High Deck Shot (2300 mm)
        Long (2545 mm)
        Singapore Steel Flat Deck (Just Low) Long (2545 mm)
        Component Outline
        No. 2 Cross Member*1 Shaped to facilitate the installation of various types of wiring harnesses and pipes.
        No. 2 Cross Member*2 Located near the No. 1 spring bracket, this cross member is riveted to the top and bottom surfaces of the side rails in order to ensure the rigidity of the area where the suspension is mounted.
        No. 3 Cross Member The wall of the cross member has been made thicker to ensure its strength and rigidity for mounting the torsion bar anchor arm and the rear engine mount.
        No. 5 Cross Member This cross member is made of a pipe material that has been butted for weight reduction by decreasing the thickness of the pipe-wall in its midsection.
        No. 4 Cross Member It has a C-shape to improve the suspension performance of the brackets.
        Side Rail*1 It has a welded neck section until just before the No.3 cross member to ensure a highly rigid construction.
        Side Rail*2 It has been newly designed exclusively for the RFS frame to ensure a lightweight and highly rigid construction.
        Front Suspension Member In order to ensure a lightweight and highly rigid construction, support pipes have been attached to run between the mid-sections of the front and rear suspension members, resulting in the following shape: II.
        Front Cross Member*1 It has a C-shape cross-section to ensure a lightweight and highly rigid construction.
        Front Cross Member*2 Located at the front tip of the frame, this cross member is riveted to the top and bottom surfaces of the side rails to ensure a high level of rigidity.

        • *1: for IFS models

        • *2: for RFS models

        A01KA9DE01
        Text in Illustration (Frame for IFS)
        *1 No. 2 Cross Member *2 No. 3 Cross Member
        *3 No. 5 Cross Member *4 No. 4 Cross Member
        *5 Side Rail *6 Front Suspension Member
        *7 Front Cross Member - -
        A01KA8OE01
        Text in Illustration (Frame for RFS)
        *1 No. 3 Cross Member *2 No. 4 Cross Member
        *3 No. 5 Cross Member *4 Side Rail
        *5 No. 2 Cross Member *6 Front Cross Member

    16. Improved Visibility


      1. Front and side visibility have been improved by increasing the area of the windshield glass and by optimizing the driving position.

        A01KAF4E01
        Text in Illustration
        *a Eye-point - -

    17. High-strength Cab


      1. A high-strength cab construction which help dampen the impact in the case of a collision has been achieved by adopting the effective floor side members.

        A01KAD7E01
        Text in Illustration
        *1 Floor Side-Members - -

    18. Side Impact Protection Beam


      1. A door side-impact beam is provided in the driver and front passenger door in order to achieve a high-strength door construction that helps reduce the impact to the occupants in the event of a side collision.

        A01KAARE01
        Text in Illustration
        *1 Side Impact Protection Beam - -

    19. Front Cab Interior Design


      1. The spacious cabin interior and the enlarged windshield create a bright and functional interior space.

      2. The instrument panel is designed to extend from the shoulder of the door to achieve an open feeling.

      3. The top of the instrument panel is kept low to improve visibility.

        A01KA7PE01
        Text in Illustration
        *A Models for Europe *B Models except for Europe

    20. Rear Cab Interior Design (Double Cab Model)


      1. The spacious cabin interior and the enlarged windshield create a bright and functional interior space.

      2. The instrument panel is designed to extend from the shoulder of the door to achieve an open feeling.

      3. The top of the instrument panel is kept low to improve visibility.

        A01KAB6E01