ENGINE COMPARTMENT REFERENCE VALUES POINT-TO-POINT DISTANCE
Tech Tips
-
Measure points with the radiator lower air deflector, radiator support seal upper, radiator cover plate, front fender top reinforcement, cowl top ventilator louver reinforcement and cowl top ventilator louver center removed.
-
In cases in which only one dimension is given, left and right are symmetrical.
-
For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).
| Symbol | Name | Hole Diameter mm (in.) |
|---|---|---|
| A, a | Front Bumper Installation Bolt | M6 (0.24) |
| B, b | Headlight Installation Screw | - |
| C, c | Headlight Installation Screw | - |
| D, d | Front Fender Installation Bolt | M6 (0.24) |
| E, e | Front Fender Installation Bolt | M6 (0.24) |
| F, f | Cowl Top Ventilator Louver Installation Clip | - |
| *A | for LHD | - | - |
| *a | mm (in.) |
- | - |
| *W | Width distance | *L | Length distance |
| *A | for RHD | - | - |
| *a | mm (in.) |
- | - |
| *W | Width distance | *L | Length distance |