TORQUE FRONT BOX(for 2WD) ASSEMBLY REPLACEMENT

B003FXO

  1. REMOVAL

    Symbol Meaning
    B003FY5 Remove Weld Points
    B003G73 Remove Weld Points

    1. Roughly cut open the panel so that the adhesive can be reached. Cut through the adhesive with a cut chisel to remove the panel.

      Tech Tips

      In cases where the adhesive cannot be removed with a cut chisel, heat the adhesive with an industrial heater gun or gas burner taking care not to cause panel deformation by overheating.

      B003FZAC01
      B003G32 Adhesive - -
      B003G06
      B003G7D

  2. INSTALLATION

    Symbol Meaning
    B003G18 Plug Weld
    B003FYT Plug Weld

    1. Apply adhesive (3MTMAutomixTMPanel Bonding Adhesive #8115).

      Tech Tips


      • Apply a light coat of adhesive around the plug welding points.

      • Apply enough adhesive to the panels.

      B003FZAC01
      B003G32 Adhesive - -

    2. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

      B003FZYC01
      *1 FRONT SIDE MEMBER BRACKET SUB-ASSEMBLY - -
      B003G79

    3. After welding, apply body sealer and undercoating to the corresponding parts. (See the painting/coating)

    4. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.