|Remove Weld Points|
Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.
Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)
|*1||RADIATOR SUPPORT SUB-ASSEMBLY||*2||FRONT BUMPER MOUNTING REINFORCE SUB-ASSEMBLY|
|N*m (kgf*cm, ft.*lbf) : Specified torque||-||-|
When repairing the radiator support-related, check the state of the release cable and the state of the actuator (amount of protrusion and clearance of surroundings).(See the introduction)
After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.