WORK NOTICES AND PRECAUTIONS PRECAUTIONS FOR FRONT SIDE RADAR SENSOR


  1. FRONT SIDE RADAR SENSOR DESCRIPTION


    1. Front side radar sensor radiate electromagnetic waves to detect moving objects in a front side area of the vehicle and performs high driving assist by sending this information to each system.

    2. The radiation range of the electromagnetic waves expands vertically and horizontally in relation to the sensor.

      B003FZJC01
      *1 FRONT SIDE RADAR SENSOR - -
      *a Expansion of Electromagnetic Waves (Example) *b Vertically 60°
      *c Horizontally 160° - -

  2. PROCEDURES FOR MEASURING THE INSTALLATION ANGLE OF FRONT SIDE RADAR SENSOR


    1. The installation angle is measured at the planes A, B, and C by use of a digital angle meter, 3D measuring instrument, or similar instrument.

    2. For B and C, measure the sensor planes by use of a digital angle meter, or measure the position of the sensor bracket.

    3. As an angle meter cannot be used to measure A, measure the sensor bracket (dimension y).

      B003G3IC01
      *a Top View *b Rear View
      *c Side View *d Sensor reference plane if measuring with a digital angle meter
      *e B/C: Measure along either the horizontal or vertical axis - -

  3. RADIATION RANGES OF THE ELECTROMAGNETIC WAVES OF THE FRONT SIDE RADAR SENSOR IN RELATION TO THE BUMPER


    1. Measure dimensions along the front surface of the bumper.

      B003G6RC01
      *a 11 mm (0.43 in.) *b 323 mm (12.72 in.)
      *c 151 mm (5.94 in.) *d 321 mm (12.64 in.)
      *e 146 mm (5.75 in.) *f 98 mm (3.86 in.)
      *g 93 mm (3.66 in.) *h 339 mm (13.35 in.)
      B003G32 Radiation Range of Electromagnetic Waves - -

  4. PROHIBITIONS REGARDING RADIATION RANGE OF ELECTROMAGNETIC WAVES


    1. The following work is prohibited within the radiation ranges of electromagnetic waves because they might affect the waves.


      1. Putty application repair of damaged areas

        Tech Tips

        Repair by painting is allowed for slight damage that can be filled in by a primer surfacer or paint.

        B003G8VC01
        *a Avoid the radiation ranges of electromagnetic waves *b Apply only primer surfacer to repair damage
        *c Radiation Range of Electromagnetic Waves *d Cross-Section
        B003FZ6 FRONT BUMPER COVER B003FXU FRONT SIDE RADAR SENSOR
        B003G1Z Putty B003G6T Primer surfacer
        B003FY8C01
        *a Putty is present within the radiation range of electromagnetic waves *b Putty is applied to damage within the radiation range of electromagnetic waves
        *c Radiation Range of Electromagnetic Waves *d Cross-Section
        B003FZ6 FRONT BUMPER COVER B003FXU FRONT SIDE RADAR SENSOR
        B003G1Z Putty - -

      2. Paint work having paint boundaries (boundaries of final color or gradations) within the radiation range of electromagnetic waves

        Tech Tips

        There is no problem if the entire radiation range of electromagnetic waves is completely painted.

        B003G3UC01
        *a Avoid the radiation ranges of electromagnetic waves *b Radiation range of electromagnetic waves is covered
        *c Radiation Range of Electromagnetic Waves *d Cross-Section
        *e Clear - -
        B003FZ6 FRONT BUMPER COVER B003FXU FRONT SIDE RADAR SENSOR
        B003G6T Final Color B003G2A Gradation
        B003G0MC01
        *a Paint boundary is present within the radiation range of electromagnetic waves *b Gradation is present within the radiation range of electromagnetic waves
        *c Radiation Range of Electromagnetic Waves *d Cross-Section
        B003FZ6 FRONT BUMPER COVER B003FXU FRONT SIDE RADAR SENSOR
        B003G6T Final Color B003G2A Gradation

      3. Resin repair of cracks and perforations

        Tech Tips

        Always replace the rear bumper cover if there are cracks or perforations in the radiation range of electromagnetic waves.

        B003FY9C01
        *a Radiation Range of Electromagnetic Waves - -
        B003G6T Cracks or perforation - -
        B003G8GC01
        *a Radiation Range of Electromagnetic Waves - -
        B003G6T Cracks or perforation - -

      4. Bumper customization (Work affecting the shape or paint color of the bumper)