NAME PLATE ATTACHMENT POSITION


  1. Heat the double-sided tape remaining on the body with an infrared lamp or equivalent.

    Tech Tips

    Heat the tape to 40 to 60°C for approximately 1 to 2 minutes.

  2. Wipe off the remaining double-sided tape using a clean cloth or equivalent.

    Note

    If a name plate is installed without thoroughly removing the remaining double-sided tape from the body, the name plate will not adhere properly. Make sure to thoroughly wipe off the double-sided tape.

  3. After cleaning the installation area of the body with degreasing agent, attach the name plate to the position shown in the illustration.

    Tech Tips

    The working environment should be 20°C when installing the name plate. If the working environment is below 20°C, heat the installation area of the body to 20 to 30°C and then install the name plate.

B003GBGC04
*1 NO. 1 LUGGAGE COMPARTMENT DOOR NAME PLATE *2 SYMBOL EMBLEM
Non-reusable part - -
B003G4YC01
*A for 2WD *B for AWD
*1 NO. 3 LUGGAGE COMPARTMENT DOOR PLATE - -
Non-reusable part - -
B003G8MC04
*A for Sport Package - -
*1 FRONT FENDER NO. 1 NAME PLATE *2 FRONT FENDER NO. 2 NAME PLATE
Non-reusable part - -
B003G1SC04
*1 BODY SIDE NAME PLATE - -
Non-reusable part - -

  1. SYMBOL EMBLEM

    B003G3TC02
    *a Boss Position
  2. NO. 1 LUGGAGE COMPARTMENT DOOR NAME PLATE

    B003GBZC03
    *a Reference Values *b R End
  3. NO. 3 LUGGAGE COMPARTMENT DOOR PLATE


    1. for 2WD:

      B003G87C06
  4. *a Reference Values *b R End
  • for AWD:

    B003G64C03
  • *a Reference Values *b R End
  • FRONT FENDER NO. 2 NAME PLATE (for Sport Package)

    B003G9CC02
  • *a Boss Position
  • FRONT FENDER NO. 1 NAME PLATE (for Sport Package)

    B003GBSC03
    *a Boss Position
  • BODY SIDE NAME PLATE (for LH Side)

    B003G0BC02
    *a Reference Values *b R End
  • BODY SIDE NAME PLATE (for RH Side)

    B003G9IC02
  • *a Reference Values *b R End