LUGGAGE DOOR POINT-TO-POINT DISTANCE
Tech Tips
-
In cases in which only one dimension is given, left and right are symmetrical.
-
For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).
| Symbol | Name | Hole Diameter mm (in.) |
|---|---|---|
| A, a | Roof Panel Corner | - |
| B, b | Front Side Outer Panel Standard Hole | 13X10 (0.51X0.39) |
| C | Upper Back Reinforcement Center Mark | - |
| D, d | Front Side Outer Panel Standard Hole | φ13 (0.51) |
| E, e | Quarter Panel Inner Corner | - |
| F, f | Luggage Compartment Opening Trough Corner | - |
| G, g | Quarter Panel Inner Corner | - |
| H, h | Rear Floor Finish Plate Installation Hole | φ8.5 (0.33) |
| J, j | Luggage Compartment Door Lock Striker Installation Nut | M8 (0.31) |
| K, k | Rear Bumper Reinforcement Installation Nut | M8 (0.31) |
| L, l | Rear Floor Side Member Rear Standard Hole | φ18 (0.71) |
| M, m | Rear Floor Side Member Rear Standard Hole | φ18 (0.71) |
| N | Center Floor Cross Member No.3 Center Hole Nut | M8 (0.31) |
| O, o | Rear Combination Light Installation Hole | 9x9 (0.35x0.35) |
| P, p | Rear Combination Light Installation Hole | 9x9 (0.35x0.35) |
| Q, q | Rear Bumper Installation Hole | 9x9 (0.35x0.35) |
| R, r | Rear Bumper Retainer Upper Installation Hole | 9x9 (0.35x0.35) |
| S, s | Rear Bumper Retainer Upper Installation Hole | 9x9 (0.35x0.35) |
| T, t | Rear Spring Support Installation Hole | φ12.5 (0.49) |
| U, u | Roof Side Rail Assembly Mark | - |
| *a | mm (in.) |
- | - |
| *W | Width distance | *L | Length distance |
| *X | Diagonal distance | - | - |
| *a | mm (in.) |
- | - |
| *a | mm (in.) |
- | - |
| *W | Width distance | *L | Length distance |
| *X | Diagonal distance | - | - |