REAR DOOR POINT-TO-POINT DISTANCE
Tech Tips
-
Use point L when performing centering measurements for the body dimensions.
-
In cases in which only one dimension is given, left and right are symmetrical.
-
For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).
| Symbol | Name | Hole Diameter mm (in.) |
|---|---|---|
| A, a | Roof Side Rail Assembly Mark | - |
| B, b | Rear Door Hinge Installation Nut | M8 (0.31) |
| C, c | Rear Door Hinge Installation Nut | M8 (0.31) |
| D, d | Center Body Pillar Assembly Mark | - |
| E, e | Center Body Pillar Assembly Mark | - |
| F, f | Rocker Panel Assembly Mark | - |
| G, g | Roof Side Rail Assembly Mark | - |
| H, h | Quarter Panel Assembly Mark | - |
| J, j | Quarter Panel Assembly Mark | - |
| K, k | Rear Door Lock Striker Installation Nut | M8 (0.31) |
| L | Transmission Cover Standard Hole | - |
 |
Symmetric distance |  |
Asymmetric distance |
| *a | mm (in.) |
- | - |
| *W | Width distance | *X | Diagonal distance |
| *a | mm (in.) |
- | - |