ENGINE COMPARTMENT POINT-TO-POINT DISTANCE
Tech Tips
-
In cases in which only one dimension is given, left and right are symmetrical.
-
For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).
| Symbol | Name | Hole Diameter mm (in.) |
|---|---|---|
| A | Cowl Top Panel Center Mark | - |
| B, b | Hood Hinge Installation Nut | M8 (0.31) |
| C, c | Cowl Top Side Panel Standard Hole | φ10 (0.39) |
| D, d | Outrigger No.1 Installation Bolt | M6 (0.24) |
| E, e | Outrigger No.1 Installation Bolt | M6 (0.24) |
| F, f | Radiator Upper Support Standard Hole | φ10 (0.39) |
| G, g | Radiator Support Upper Installation Nut | M6 (0.24) |
| H, h | Radiator Support Upper Installation Nut | M6 (0.24) |
| J, j | Front Bumper Mounting Reinforcement Installation Nut | M12 (0.47) |
| K | Hood Lock Support Brace Installation Nut | M6 (0.24) |
| L, l | Front Bumper Mounting Reinforcement Installation Nut | M12 (0.47) |
| M, m | Front Bumper Mounting Reinforcement Installation Nut | M12 (0.47) |
| N, n | Radiator Support to Front Fender Bracket Standard Hole | φ15 (0.59) |
| O, o | Front Side Member Standard Hole | φ10 (0.39) |
| P, p | Front Side Member Standard Hole | φ15 (0.59) |
| Q, q | Front Spring Support Installation Hole (Upper Face) | φ12.5 (0.49) |
| R, r | Front Spring Support Installation Hole (Lower Face) | φ12.5 (0.49) |
| S, s | Front Side Member Plate Outer Standard Hole | φ10 (0.39) |
 |
Symmetric distance |  |
Asymmetric distance |
| *A | for LHD | *B | for RHD |
| *a | Height from Imaginary Datum Line | *b | mm (in.) |
| *W | Width distance | *L | Length distance |
| *X | Diagonal distance | - | - |
| *A | for LHD | *B | for RHD |
| *a | mm (in.) |
- | - |
| *W | Width distance | *L | Length distance |
| Symbol | Name | Hole Diameter mm (in.) |
|---|---|---|
| A | Cowl Top Panel Center Mark | - |
| B, b | Front Fender Installation Nut | M6 (0.24) |
| C, c | Cowl Top Side Panel Standard Hole | φ10 (0.39) |
| D, d | Front Fender Installation Nut | M6 (0.24) |
| E, e | Radiator Upper Support Standard Hole | φ10 (0.39) |
| F, f | Headlight Installation Hole | 9X9 (0.35X0.35) |
| G, g | Radiator Support Upper Standard Hole | φ10 (0.39) |
| H, h | Radiator Support Upper Installation Nut | M6 (0.24) |
| J | Radiator Support Cover Installation Hole | φ10 (0.39) |
| K, k | Headlight Installation Hole | 9X9 (0.35X0.35) |
| L | Hood Lock Support Brace Installation Nut | M6 (0.24) |
| M, m | Front Fender Installation Nut | M6 (0.24) |
| N, n | Front Fender Installation Nut | M6 (0.24) |
| |
Symmetric distance | |
Asymmetric distance |
| *A | for LHD | *B | for RHD |
| *a | mm (in.) |
- | - |
| *W | Width distance | *X | Diagonal distance |