BODY PANEL SEALING APPLICATION AREAS
-
Be sure to apply body sealer to the body panel joints and door edges (tip of outer panel folded part), etc., to waterproof and rustproof them.
Tech Tips
-
Apply degreasing agent to a clean cloth and clean the sealer application areas.
-
After removing the applied spot sealer from the sealer application areas using thinner or equivalent, rustproof the areas by applying primer or equivalent. Then apply body sealer.
-
If sealer is unnecessarily applied to an area, apply degreasing agent to a clean cloth and clean off the body sealer immediately.
-
 |
Flat Finishing |  |
No Flat Finishing |
| *A | for Sliding Roof | *B | for Panoramic Moon Roof |
| *A | for 2WD | *B | for AWD |
| *A | LH Side | *B | RH Side |
| *A | for Sliding Roof | *B | for Panoramic Moon Roof |
