RADIATOR SUPPORT ASSEMBLY REPLACEMENT

B003HWZ

  1. REMOVAL

    Symbol Meaning
    B0054Y8 Remove Weld Points
    B003HOB
    B003HSXC01
    *A LH Side *B RH Side

  2. INSTALLATION

    Symbol Meaning
    B0054U5 Plug Weld

    1. Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

    2. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

      B003HVIC02
      *1 RADIATOR SUPPORT SUB-ASSEMBLY *2 RADIATOR SUPPORT SUB-ASSEMBLY UPPER
      *3 FRONT CROSS MEMBER SUB-ASSEMBLY *4 FRONT BUMPER MOUNTING REINFORCE SUB-ASSEMBLY
      B0054UX N*m (kgf*cm, ft.*lbf) : Specified torque - -
      B003HY1C01
      *A LH Side *B RH Side

    3. When repairing the radiator support-related, check the state of the release cable and the state of the actuator (amount of protrusion and clearance of surroundings).(See the introduction)

    4. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

    5. Measure the dimensions before installing the headlights.

      B003HX9C01
      *A for RHD *B for LHD
      B003HPNN01