TORQUE FRONT BOX(for AWD) ASSEMBLY REPLACEMENT

B0054XQ

  1. REMOVAL

    Symbol Meaning
    B0054Y8 Remove Weld Points
    B0054WC Remove Weld Points
    B0054TV Cut and Join Location

    1. Roughly cut open the panel so that the adhesive can be reached. Cut through the adhesive with a cut chisel to remove the panel.

      Tech Tips

      In cases where the adhesive cannot be removed with a cut chisel, heat the adhesive with an industrial heater gun or gas burner taking care not to cause panel deformation by overheating.

      B0054W4C01
      B0054VN Adhesive - -
      B0054VO
      B0054YC

  2. INSTALLATION

    Symbol Meaning
    B0054U5 Plug Weld
    B0054U8 Plug Weld
    B0054TV Cut and Join Location
    B0054V1 Butt Weld

    1. If the entire supply part is not needed, remove the part of the supply part that is needed.

      B0054VVC01
      *1 FRONT SIDE MEMBER BRACKET SUB-ASSEMBLY - -

    2. Apply adhesive (3MTMAutomixTMPanel Bonding Adhesive #8115).

      Tech Tips


      • Apply a light coat of adhesive around the plug welding points.

      • Apply enough adhesive to the panels.

      B0054W4C01
      B0054VN Adhesive - -

    3. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

      B0054UU
      B0054Y5

    4. After welding, apply body sealer and undercoating to the corresponding parts. (See the painting/coating)

    5. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.