TORQUE FRONT BOX(for 2WD) ASSEMBLY REPLACEMENT

B0054XQ

  1. REMOVAL

    Symbol Meaning
    B0054Y8 Remove Weld Points
    B0054WC Remove Weld Points

    1. Roughly cut open the panel so that the adhesive can be reached. Cut through the adhesive with a cut chisel to remove the panel.

      Tech Tips

      In cases where the adhesive cannot be removed with a cut chisel, heat the adhesive with an industrial heater gun or gas burner taking care not to cause panel deformation by overheating.

      B0054XZC01
      B0054VN Adhesive - -
      B0054WX
      B0054U0

  2. INSTALLATION

    Symbol Meaning
    B0054U5 Plug Weld
    B0054U8 Plug Weld

    1. Apply adhesive (3MTMAutomixTMPanel Bonding Adhesive #8115).

      Tech Tips


      • Apply a light coat of adhesive around the plug welding points.

      • Apply enough adhesive to the panels.

      B0054XZC01
      B0054VN Adhesive - -

    2. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

      B0054TXC01
      *1 FRONT SIDE MEMBER BRACKET SUB-ASSEMBLY - -
      B0054TC

    3. After welding, apply body sealer and undercoating to the corresponding parts. (See the painting/coating)

    4. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.