REAR FLOOR SIDE PANEL ASSEMBLY REPLACEMENT

A004CVI

  1. REMOVAL

    Symbol Meaning
    A004D0P Remove Weld Points
    A004D62 Remove Weld Points

    1. Roughly cut open the panel so that the adhesive can be reached. Cut through the adhesive with a cut chisel to remove the panel.

      Tech Tips

      In cases where the adhesive cannot be removed with a cut chisel, heat the adhesive with an industrial heater gun or gas burner taking care not to cause panel deformation by overheating.

      A004D50C01
      A004D5G Adhesive - -
      A004CWM

  2. INSTALLATION

    Symbol Meaning
    A004D2M Plug Weld
    A004D7A Plug Weld

    1. Apply adhesive (3MTMAutomixTMPanel Bonding Adhesive #8115).

      Tech Tips


      • Apply a light coat of adhesive around the plug welding points.

      • Apply enough adhesive to the panels.

      A004D50C01
      A004D5G Adhesive - -
      A004D3QC01
      *1 REAR FLOOR TO QUARTER EXTENSION SUB-ASSEMBLY - -

    2. After welding, apply body sealer and undercoating to the corresponding parts. (See the painting/coating)

    3. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.