CAUTION LABEL ATTACHMENT POSITION


  1. After using a degreasing agent to clean the surfaces of the body where the caution labels will be attached, attach the caution labels to the positions shown in the illustration.

    Tech Tips


    • Make sure the caution label is not attached over a spot weld.

    • When attaching the caution label, make sure not to touch the label's adhesive surface.

    • To prevent the edges of the caution label from peeling, apply extra pressure to the label's periphery.

    • If the work area's temperature is 5°C or less, the caution label's adhesive will deteriorate. It is recommended that you heat the label to 20 to 40°C.

B0049KKC01
*1 ENGINE CAUTION LABEL *2 HV BATTERY LOCATION LABEL
*3 SECOND BATTERY LOCATION LABEL *4 HV INVERTER COOLANT INFORMATION LABEL
*5 FAN CAUTION LABEL *6 LLC INFORMATION LABEL
*7 AIR CONDITIONER CAUTION LABEL *8 FUEL LABEL
B0049JNC02
*1 EMISSION CONTROL INFORMATION LABEL *2 ENGINE CAUTION LABEL
*3 HV BATTERY LOCATION LABEL *4 SECOND BATTERY LOCATION LABEL
*5 HV INVERTER COOLANT INFORMATION LABEL *6 FAN CAUTION LABEL
*7 LLC INFORMATION LABEL *8 AIR CONDITIONER CAUTION LABEL
*9 FUEL LABEL - -
B0049IDC01
*1 ENGINE CAUTION LABEL *2 HV BATTERY LOCATION LABEL
*3 SECOND BATTERY LOCATION LABEL *4 HV INVERTER COOLANT INFORMATION LABEL
*5 FAN CAUTION LABEL *6 LLC INFORMATION LABEL
*7 AIR CONDITIONER CAUTION LABEL *8 FUEL LABEL
B0049KFC01
*A for LHD - -
*1 TIRE PRESSURE INFORMATION LABEL *2 SIDE AIRBAG CAUTION LABEL
*3 NAME LABEL - -
B0049JTC01
*A for LHD - -
*1 TIRE PRESSURE INFORMATION LABEL *2 SIDE AIRBAG CAUTION LABEL
*3 CR LABEL *4 RUN FLAT TIRE CAUTION LABEL
B0049JDC01
*A for LHD - -
*1 TIRE PRESSURE INFORMATION LABEL *2 SIDE AIRBAG CAUTION LABEL
*3 CR LABEL - -
B0049KIC01
*A for RHD - -
*1 TIRE PRESSURE INFORMATION LABEL *2 SIDE AIRBAG CAUTION LABEL
*3 NAME LABEL - -
B0049JQC01
*A for RHD - -
*1 TIRE PRESSURE INFORMATION LABEL *2 SIDE AIRBAG CAUTION LABEL
*3 COMPLIANCE PLATE *4 NAME LABEL