NAME PLATE ATTACHMENT POSITION


  1. Heat the double-sided tape remaining on the body with an infrared lamp or equivalent.

    Tech Tips

    Heat the tape to 40 to 60°C for approximately 1 to 2 minutes.

  2. Wipe off the remaining double-sided tape using a clean cloth or equivalent.

    Note

    If a name plate is installed without thoroughly removing the remaining double-sided tape from the body, the name plate will not adhere properly. Make sure to thoroughly wipe off the double-sided tape.

  3. After cleaning the installation area of the body with degreasing agent, attach the name plate to the position shown in the illustration.

    Tech Tips

    The working environment should be 20°C when installing the name plate. If the working environment is below 20°C, heat the installation area of the body to 20 to 30°C and then install the name plate.

A004BTYC05
*1 NO. 3 LUGGAGE COMPARTMENT DOOR PLATE *2 SYMBOL EMBLEM
● Non-reusable part - -
A004BTGC03
*1 NO. 1 REAR BODY NAME PLATE *2 NO. 2 REAR BODY NAME PLATE
● Non-reusable part - -

  1. SYMBOL EMBLEM

    A004BOE

  2. NO. 3 LUGGAGE COMPARTMENT DOOR PLATE

    A004BV1C04
    *a 27 mm (1.063 in.)
    *b 2.147 mm (0.085 in.)
    *c 7.192 mm (0.283 in.)
    *d 1.598 mm (0.063 in.)
    *e 1.809 mm (0.071 in.)
    *f 2.195 mm (0.086 in.)
    *g R End
    *h Center of the Luggage Compartment Door Panel

  3. NO. 2 REAR BODY NAME PLATE

    A004BO2C02
    *a 1.4 mm (0.055 in.) *b 1.6 mm (0.063 in.)
    *c 5.6 mm (0.220 in.) *d 1.7 mm (0.067 in.)
    *e 4.4 mm (0.173 in.) *f 4.5 mm (0.177 in.)
    *g 5.0 mm (0.197 in.) *h 5.2 mm (0.205 in.)
    *i 138.7 mm (5.461 in.) *j 142 mm (5.591 in.)
    *k 170.8 mm (6.724 in.) *l R End

  4. NO. 1 REAR BODY NAME PLATE

    A004BR9C03
    *a 1.4 mm (0.055 in.) *b 1.6 mm (0.063 in.)
    *c 5.6 mm (0.220 in.) *d 1.7 mm (0.067 in.)
    *e 4.3 mm (0.169 in.) *f 5.2 mm (0.205 in.)
    *g 5.0 mm (0.197 in.) *h 3.7 mm (0.146 in.)
    *i 142.7 mm (5.618 in.) *j 139.4 mm (5.488 in.)
    *k 118.3 mm (4.657 in.) *l R End