QUARTER WHEEL HOUSING OUTER PANEL ASSEMBLY REPLACEMENT

A01R1KV


  1. REMOVAL

    Symbol Meaning
    A01R1KN Remove Weld Points
    A01R1QL Remove Weld Points
    A01R1MV Remove Weld Points
    A01R1MP Cut and Join Location

    1. After removing the A and B, remove the quarter wheel house panel outer.

      Tech Tips

      A and B are reused.

      A01R1KCC01
      *A LH - -
      *1 QUARTER WHEEL HOUSE PANEL OUTER - -
      *a 130 mm (5.12 in.) *b 40 mm (1.57 in.)
      A01R1LIC01
      *A LH - -

    2. After removing the A and B, remove the quarter wheel house panel outer.

      Tech Tips

      A and B are reused.

      A01R1MIC01
      *A RH - -
      *1 QUARTER WHEEL HOUSE PANEL OUTER - -
      *a 130 mm (5.12 in.) *b 40 mm (1.57 in.)
      A01R1RNC01
      *A RH - -

  2. INSTALLATION

    Symbol Meaning
    A01R1T0 Spot Weld
    A01R1OT Plug Weld
    A01R1M5 Plug Weld
    A01R1U8 Plug Weld
    A01R1LT Butt Weld
    A01R1SC Body Sealer
    A01R1NO Assembly Mark

    1. For positioning of the new parts, align the installation standard holes of the outer panel and the inner panel.

      A01R1LRC01
      *A LH - -

    2. Before installing a new part, apply body sealer.

      Tech Tips

      Apply body sealer in an even, continuous bead.

      A01R1OZC01
      *A LH - -

    3. Weld the quarter wheel house panel outer to the vehicle side.

      A01R1RZC01
      *A LH - -
      *1 QUARTER WHEEL HOUSE PANEL OUTER - -

    4. Weld the A and B to the vehicle side.

      A01R1PPC01
      *A LH - -

    5. For positioning of the new parts, align the installation standard holes of the outer panel and the inner panel.

      A01R1PZC01
      *A RH - -

    6. Before installing a new part, apply body sealer.

      Tech Tips

      Apply body sealer in an even, continuous bead.

      A01R1S5C01
      *A RH - -

    7. Weld the quarter wheel house panel outer to the vehicle side.

      A01R1MMC01
      *A RH - -
      *1 QUARTER WHEEL HOUSE PANEL OUTER - -

    8. Weld the A and B to the vehicle side.

      A01R1QFC01
      *A RH - -

    9. After welding, apply body sealer and undercoating to the corresponding parts. (See the painting/coating)

    10. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.