QUARTER PANEL CUT AND JOIN REPLACEMENT SECTIONS (SMALL AREAS)

A01R1SM

  1. REMOVAL

    Symbol Meaning
    A01R1KN Remove Weld Points
    A01R1MP Cut and Join Location
    A01R1MG Cut Location for Supply Parts
    A01R1Q8C01
    *a 220 mm (8.66 in.) - -
    A01R1P6

  2. INSTALLATION

    Symbol Meaning
    A01R1OT Plug Weld
    A01R1LT Butt Weld
    A01R1SC Body Sealer

    1. Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

    2. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

    3. Before installing a new part, apply body sealer.

      Tech Tips

      Apply body sealer in an even, continuous bead.

      A01R1OQC01
      *a 5 mm (0.20 in.) - -
      A01R1NDC01
      *1 QUARTER PANEL - -

    4. After welding, apply the foamed sealing material to the corresponding parts. (See the painting/coating)

    5. After welding, apply body sealer to the corresponding parts. (See the painting/coating)

    6. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.