UNDER BODY REFERENCE VALUES THREE-DIMENSIONAL DISTANCE
Tech Tips
-
Measure points with the No.1 engine under cover removed.
-
Point A, a, B, b and E, e on the vehicle are asymmetrical.
-
In cases in which only one dimension is given, left and right are symmetrical.
-
For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).
| Symbol | Name | Hole Diameter mm (in.) |
|---|---|---|
| A, a | Side Rail Reinforcement Installation Bolt | M12 (0.47) |
| B, b | Side Rail Reinforcement Installation Bolt | M12 (0.47) |
| C, c | Front Suspension Crossmember Installation Bolt | M14 (0.55) |
| D, d | Front Suspension Member Rear Brace Installation Bolt | M14 (0.55) |
| E, e | Front Side Member Standard Hole | φ15 (0.59) |
| *a | Distance between points other than those above | *b | mm (in.) |