REAR FLOOR PAN ASSEMBLY REPLACEMENT

A01R1L5


  1. REMOVAL

    Symbol Meaning
    A01R1KN Remove Weld Points
    A01R1QL Remove Weld Points
    A01R1MV Remove Weld Points
    A01R1SU
    A01R1NFC01
    *A LH Side *B RH Side

  2. INSTALLATION

    Symbol Meaning
    A01R1OT Plug Weld
    A01R1M5 Plug Weld
    A01R1U8 Plug Weld

    1. Before temporarily installing the new parts, weld the rear floor pan, rear floor panel reinforcement No.2, rear floor pan extension, rear floor panel reinforcement No.1, rear floor crossmember bracket, sub floor plate, battery bracket sub-assembly front and battery carrier panel rear with the standard number of welding points.

      A01R1N4C01
      *A w/o Spare Tire - -
      *1 REAR FLOOR PAN *2 REAR FLOOR PANEL REINFORCEMENT NO.2
      *3 REAR FLOOR PAN EXTENSION *4 REAR FLOOR PANEL REINFORCEMENT NO.1
      *5 REAR FLOOR CROSSMEMBER BRACKET *6 SUB FLOOR PLATE
      *7 BATTERY BRACKET SUB-ASSEMBLY FRONT *8 BATTERY CARRIER PANEL REAR

    2. Before temporarily installing the new parts, weld the rear floor pan, rear floor panel reinforcement No.2, rear floor pan extension, rear floor panel reinforcement No.1, rear floor crossmember bracket, spare wheel bracket, sub floor plate, battery bracket sub-assembly front and battery carrier panel rear with the standard number of welding points.

      A01R1Q5C01
      *A w/ Spare Tire - -
      *1 REAR FLOOR PAN *2 REAR FLOOR PANEL REINFORCEMENT NO.2
      *3 REAR FLOOR PAN EXTENSION *4 REAR FLOOR PANEL REINFORCEMENT NO.1
      *5 REAR FLOOR CROSSMEMBER BRACKET *6 SPARE WHEEL BRACKET
      *7 SUB FLOOR PLATE *8 BATTERY BRACKET SUB-ASSEMBLY FRONT
      *9 BATTERY CARRIER PANEL REAR - -
      A01R1NP
      A01R1TAC01
      *A LH Side *B RH Side

    3. After welding, apply body sealer and undercoating to the corresponding parts. (See the painting/coating)

    4. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.