BODY LOWER BACK INNER PANEL CUT AND JOIN REPLACEMENT SECTIONS (LARGE AREAS)

A01R1MJ


  1. REMOVAL

    Symbol Meaning
    A01R1KN Remove Weld Points
    A01R1MP Cut and Join Location
    A01R1S0C01
    *a 225 mm (8.86 in.) - -

  2. INSTALLATION

    Symbol Meaning
    A01R1OT Plug Weld
    A01R1LT Butt Weld

    1. Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

    2. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

      A01R1QOC01
      *1 BODY LOWER BACK PANEL SUB-ASSEMBLY - -

    3. After welding, apply body sealer and undercoating to the corresponding parts. (See the painting/coating)

    4. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.