REAR DOOR THREE-DIMENSIONAL DISTANCE


  1. w/o Rear No. 2 Seat

    Tech Tips


    • Use point M when performing centering measurements for the body dimensions.

    • In cases in which only one dimension is given, left and right are symmetrical.

    • For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).

    Measuring Point Name
    Symbol Name

    Hole Diameter

    mm (in.)
    A, a Roof Side Rail Assembly Mark -
    B, b Rear Door Hinge Installation Nut M10 (0.39)
    C, c Rear Door Hinge Installation Nut M10 (0.39)
    D, d Center Body Pillar Assembly Mark -
    E, e Center Body Pillar Assembly Mark -
    F, f Rocker Panel Assembly Mark -
    G, g Roof Side Rail Assembly Mark -
    H, h Quarter Panel Assembly Mark -
    J, j Quarter Panel Assembly Mark -
    K, k Rear Door Lock Striker Installation Nut M8 (0.31)
    L, l Front Floor Brace Center Standard Hole φ10 (0.39)
    M Front Floor Panel Reinforcement Front Standard Hole φ10 (0.39)
    B0055QXC01
    *a Distance between points other than those above *b

    mm

    (in.)
    B005606C01
    *a Distance between points other than those above *b

    mm

    (in.)

  2. w/ Rear No. 2 Seat

    Tech Tips


    • Use point M when performing centering measurements for the body dimensions.

    • In cases in which only one dimension is given, left and right are symmetrical.

    • For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).

    Measuring Point Name
    Symbol Name

    Hole Diameter

    mm (in.)
    A, a Roof Side Rail Assembly Mark -
    B, b Rear Door Hinge Installation Nut M10 (0.39)
    C, c Rear Door Hinge Installation Nut M10 (0.39)
    D, d Center Body Pillar Assembly Mark -
    E, e Center Body Pillar Assembly Mark -
    F, f Rocker Panel Assembly Mark -
    G, g Roof Side Rail Assembly Mark -
    H, h Quarter Panel Assembly Mark -
    J, j Quarter Panel Assembly Mark -
    K, k Rear Door Lock Striker Installation Nut M8 (0.31)
    L, l Front Floor Brace Center Standard Hole φ10 (0.39)
    M Front Floor Panel Reinforcement Front Standard Hole φ10 (0.39)
    B0055S2C01
    *a Distance between points other than those above *b

    mm

    (in.)
    B0055XBC01
    *a Distance between points other than those above *b

    mm

    (in.)