ENGINE COMPARTMENT THREE-DIMENSIONAL DISTANCE
Tech Tips
-
Point E, e, F, f, G, g on the vehicle are asymmetrical.
-
In cases in which only one dimension is given, left and right are symmetrical.
-
For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).
| Symbol | Name | Hole Diameter mm (in.) |
|---|---|---|
| A, a | Front Fender Installation Nut | M6 (0.24) |
| B, b | Front Suspension Installation Hole | φ13 (0.51) |
| C, c | Hood Hinge Installation Nut | M8 (0.31) |
| D | Cowl Top Panel Inner Center Mark | - |
| E, e | Front Side Member Standard Hole | φ18 (0.71) |
| F, f | Front Side Member Standard Hole | φ18 (0.71) |
| G | Front Side Member Standard Hole | φ18 (0.71) |
| g | Front Side Member Standard Hole | φ13 (0.51) |
| H, h | Radiator Support Upper Installation Nut | M6 (0.24) |
| J, j | Front Bumper Reinforcement Installation Nut | M10 (0.39) |
| K, k | Front Crossmember Side Gusset Standard Hole | φ10 (0.39) |
| L | Hood Lock Support Installation Nut | M6 (0.24) |
| M, m | Radiator Support to Fender Bracket Standard Hole | φ10 (0.39) |
| N, n | Radiator Support Upper Installation Nut | M6 (0.24) |
| O, o | Radiator Support Upper Standard Hole | φ10 (0.39) |
| P, p | Front Fender Installation Nut | M6 (0.24) |
| Q, q | Front Apron to Cowl Side Member Upper Standard Hole | φ13 (0.51) |
| *a | Height from Imaginary Datum Line | *b | Distance between points other than those above |
| *c | mm (in.) |
- | - |