CAUTION LABEL ATTACHMENT POSITION


  1. After using a degreasing agent to clean the surfaces of the body where the caution labels will be attached, attach the caution labels to the positions shown in the illustration.

    Tech Tips


    • Make sure the caution label is not attached over a spot weld.

    • When attaching the caution label, make sure not to touch the label's adhesive surface.

    • To prevent the edges of the caution label from peeling, apply extra pressure to the label's periphery.

    • If the work area's temperature is 5°C or less, the caution label's adhesive will deteriorate. It is recommended that you heat the label to 20 to 40°C.

A01R2S2C01
*1 INTERCOOLER LLC LABEL *2 EMISSION CONTROL INFORMATION LABEL
*3 COOLER SERVICE CAUTION LABEL *4 I/M EXEMPTION LABEL
*5 HV LLC LABEL *6 ENGINE CAUTION LABEL
*7 BATTERY LOCATION LABEL *8 FUEL INFORMATION LABEL
*9 SIDE AIR BAG CAUTION LABEL - -
B0055STC01
*A for LHD *B for RHD
*1 SIDE AIR BAG CAUTION LABEL *2 NAME PLATE
*3 DIFFERENTIAL NOTICE LABEL (for 4WD) *4 TIRE PRESSURE INFORMATION LABEL
*5 CR LABEL - -