FRONT SIDE MEMBER ASSEMBLY REPLACEMENT (PATTERN 2)

A01R2ZA


  1. REMOVAL

    Symbol meaning
    B0055SH Remove Weld Points
    A01R2SH
    A01R2SF

  2. INSTALLATION

    Symbol meaning
    B0055QO Plug Weld
    B0055SN Fillet Weld

    1. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

    2. Make sure to attach correctly in accordance with the body dimension diagram as this part affects the front wheel alignment.

      A01R2VCC01
      *1 FRONT SIDE MEMBER SUB-ASSEMBLY INNER - -
      A01R2TXC01
      *1 FRONT SIDE MEMBER PLATE OUTER *2 FREXIBLE HOUSE BRACKET
      *3 FRONT SIDE MEMBER EXTENSION - -
      *a 40 mm (1.57 in.) - -

    3. After welding, apply body sealer and undercoating to the corresponding parts. (See the painting / coating)

    4. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.