BACK DOOR THREE-DIMENSIONAL DISTANCE
Tech Tips
-
Point B, b on the vehicle are asymmetrical.
-
In cases in which only one dimension is given, left and right are symmetrical.
-
For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).
| Symbol | Name | Hole Diameter mm (in.) |
|---|---|---|
| A | Roof Panel Center Mark | - |
| B, b | Back Door Hinge Installation Hole | φ16 (0.63) |
| C, c | Back Door Damper Stay Installation Nut | M6 (0.24) |
| D, d | Roof Side Garnish Installation Hole | φ8.5 (0.33) |
| E, e | Quarter Panel Standard Hole | φ13 (0.51) |
| F, f | Side Stopper Installation Nut | M6 (0.24) |
| G, g | Roof Side Panel Inner Corner | - |
| H, h | Rear Floor Finish Plate Installation Hole | φ8.5 (0.33) |
| J, j | Back Door Lock Striker Installation Nut | M8 (0.31) |
| K, k | Rear Bumper Reinforcement Installation Bolt | M10 (0.39) |
| L, l | Rear Absorber Mounting Bracket Standard Hole | φ15 (0.59) |
| M, m | Center Body Pillar Assembly Mark | - |
| *a | Distance between points other than those above | *b | mm (in.) |