CAUTION LABEL ATTACHMENT POSITION
-
After using a degreasing agent to clean the surfaces of the body where the caution labels will be attached, attach the caution labels to the positions shown in the illustration.
Tech Tips
-
Make sure the caution label is not attached over a spot weld.
-
When attaching the caution label, make sure not to touch the label's adhesive surface.
-
To prevent the edges of the caution label from peeling, apply extra pressure to the label's periphery.
-
If the work area's temperature is 5°C or less, the caution label's adhesive will deteriorate. It is recommended that you heat the label to 20 to 40°C.
-
| *A | w/o Rear No. 2 Seat | - | - |
| *1 | COOLANT SYSTEM NOTICE LABEL | *2 | EMISSION CONTROL INFORMATION LABEL |
| *3 | COOLER SERVICE CAUTION LABEL | *4 | LOADED TESTING CAUTION LABEL |
| *5 | FUEL CAUTION PLATE | *6 | SIDE AIRBAG CAUTION LABEL |
| *A | w/o Rear No. 2 Seat | *B | for LHD |
| *C | for RHD | - | - |
| *1 | SIDE AIRBAG CAUTION LABEL | *2 | NAME PLATE |
| *3 | DIFFERENTIAL NOTICE LABEL (for AWD) | *4 | TIRE PRESSURE INFORMATION LABEL |
| *5 | CR LABEL | - | - |
| *A | w/ Rear No. 2 Seat | - | - |
| *1 | EMISSION CONTROL INFORMATION LABEL | *2 | COOLER SERVICE CAUTION LABEL |
| *3 | FUEL CAUTION PLATE | *4 | SIDE AIRBAG CAUTION LABEL |
| *A | w/ Rear No. 2 Seat | *B | for LHD |
| *C | for RHD | - | - |
| *1 | SIDE AIRBAG CAUTION LABEL | *2 | DIFFERENTIAL NOTICE LABEL |
| *3 | TIRE PRESSURE INFORMATION LABEL | *4 | CR LABEL |
| *5 | NAME PLATE | - | - |