QUARTER PANEL END HOUSING ASSEMBLY REPLACEMENT

Info Added 2016-03-29

A01Q0FJ


  1. REMOVAL

    Symbol Meaning
    A01Q0FO Remove Weld Points
    A01Q0EY Remove Weld Points
    A01Q0HQ Remove Weld Points

    1. Roughly cut open the panel so that the adhesive can be reached. Cut through the adhesive with a cut chisel to remove the panel.

      Tech Tips

      In cases where the adhesive cannot be removed with a cut chisel, heat the adhesive with an industrial heater gun or gas burner taking care not to cause panel deformation by overheating.

      A01Q0FHC01
      A01XPT4 Adhesive - -

  2. INSTALLATION

    Symbol Meaning
    A01Q0J0 Plug Weld
    A01Q0D7 Plug Weld
    A01Q0E4 Plug Weld

    1. Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

    2. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

    3. Apply adhesive (3MTMAutomixTMPanel Bonding Adhesive #8115).

      Tech Tips


      • Apply a light coat of adhesive around the plug welding points.

      • Apply enough adhesive to the panels.

      A01Q0JEC01
      A01XPT4 Adhesive - -
      A01Q0ITC01
      *1 LUGGAGE COMPARTMENT OPENING TROUGH - -

    4. After welding, apply body sealer to the corresponding parts. (See the painting/coating)

    5. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.