FRONT SIDE MEMBER CUT AND JOIN REPLACEMENT SECTIONS (LARGE AREAS)

A01Q0AQ


  1. REMOVAL

    Symbol Meaning
    A01Q0FO Remove Weld Points
    A01Q0HQ Remove Weld Points
    A01Q0M9 Cut and Join Location
    A01Q0CWC01
    *a 400 mm (15.75 in.) *b 55 mm (2.17 in.)

  2. INSTALLATION

    Symbol Meaning
    A01Q0J0 Plug Weld
    A01Q0E4 Plug Weld
    A01Q0HW Butt Weld

    1. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

    2. Make sure to attach correctly in accordance with the body dimension diagram as this part affects the front wheel alignment.

      A01Q0M3C01
      *1 FRONT SIDE MEMBER *2 FRONT SIDE MEMBER PLATE NO.4
      A01Q0ALC01
      *1 FRONT SIDE MEMBER PLATE OUTER *2 FRONT BUMPER ARM SUPPORT
      *3 FRONT SIDE MEMBER REINFORCEMENT NO.1 - -

    3. After welding, apply body sealer and undercoating to the corresponding parts. (See the painting/coating)

    4. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.