INTAKE SYSTEM DETAILS


  1. CONSTRUCTION


    1. Air Cleaner Assembly


      1. An air cleaner element with an outer frame is used.

      2. A paper type air cleaner element is used.

      3. On the models for Korea, a carbon filter, which adsorbs the HC that accumulates in the intake system when the engine is stopped, is used in the air cleaner cap sub-assembly in order to reduce evaporative emissions. The carbon filter, which is maintenance-free, cannot be removed from the air cleaner cap sub-assembly.

        A01FBP7E01
        Text in Illustration
        *A Except models for Russia *B Models for Russia
        *C Models for Korea - -
        *1 Air Cleaner Hose *2 Air Cleaner Cap Sub-assembly
        *3 Carbon Filter *4 Air Cleaner Element
        *5 Air Cleaner Case *6 Air Cleaner Inlet Assembly

    2. Throttle Body


      1. A linkless-type throttle body in which the throttle position sensor and the throttle control motor are integrated is used. It achieves excellent throttle valve control.

      2. The throttle control motor uses a DC motor with excellent response and minimal power consumption. The ECM performs duty ratio control of the direction and the amperage of the current that flows to the throttle control motor in order to regulate the throttle valve angle.

        A01FBX6E01
        Text in Illustration
        *1 Throttle Valve *2 Throttle Control Motor (DC Motor)
        *3 Throttle Position Sensor - -

    3. Intake Manifold


      1. A lightweight aluminum alloy is used for the intake manifold.

      2. The intake manifold to head gaskets have a rubber coating applied to their surfaces. They provide superior durability.

        A01FBLBE02
        Text in Illustration
        *1 Intake Manifold to Head Gasket - -
        *a A - A Cross Section - -
        A01FC8M Rubber Coating - -