METER / GAUGE SYSTEM DETAILS

Multi-information Display

1. Display Flow Function

   
   

   1. The multi-information display flow can be switched as shown in the flow chart below:

      

      No.	Transition Condition
      *1	Conditions are not met and all new messages have been displayed.
      *2	If the display conditions for 2 or more messages are met, relevant messages are alternately displayed for 2 seconds each.
      *3	If the ignition switch is turned to OFF during the "Opening" display, the "Opening" display will be shown from the beginning.
      *4	If the DISP switch is used to change from an advisory message to the cruise information display screen, repeatedly operating the DISP switch will cycle through the cruise information screens and then return the advisory message if the display conditions are still met.
      *5	If the DISP switch is not operated for more than 6 seconds with any of the caution or warning message display conditions still met, the relevant caution or warning messages are displayed.

2. Cruise Information Mode Function

   
   

   • The cruise information is displayed in the following order each time the DISP switch of the steering pad switch assembly is pressed.

   

   Text in Illustration

   *1	DISP Switch	-	-
   	DISP switch pressed briefly.	-	-

   
   

   • The cruise information mode items displayed are as follows:

   No.	Information	Outline
   (1)	Cruising Range	Displays a value that has been calculated by the combination meter assembly. When the ignition switch is turned to ON, the combination meter assembly calculates the range based on continuously monitoring and storing information on fuel consumption data, and the residual fuel volume. This display is updated every 10 seconds.
   	Average Fuel Consumption	Displays a value that has been calculated by the combination meter assembly based on the distance driven and the fuel consumption volume (fuel injection signal from the ECM). This display is updated every 10 seconds.
   (2)	Average Speed	Displays the average vehicle speed calculated by the combination meter assembly based on the engine start signal and vehicle speed signal. This display is updated every 10 seconds.
   	Elapsed Time	Displays the length of time since the engine was started.
   (3)	Eco Drive Level Display	Displays the average fuel consumption calculated since the engine was started. Uses 4 different height bars to display the level. This display is updated every 10 seconds.
   (4)	Settings	Customizes the combination meter assembly language display and Eco Driving Indicator Light and instantaneous fuel consumption gauge deactivated or activated display states.
   (5)	Blank Screen	-

3. Eco Drive Level

   
   

   • The eco drive level changes among 4 levels to indicate the average fuel consumption.

   • After the ignition switch is turned off, the eco drive level display appears for 3 seconds in the multi-information display. When the average fuel consumption is 7.8 L/100 km or less*1 or 8.8 L/100 km or less*2, the "EXCELLENT!" message flashes.

   
   

   • *1: Models with 2AR-FE engine

   • *2: Models with 2GR-FE engine

   Average Fuel Consumption Level (L/100 km)		Multi-information Display
   Level 0 (15 or more)
   Level 1 (13 to 15)
   Level 2 (11 to 13)
   Level 3 (9 to 11)
   Level 4 (9 or less)	When driving
   	After ignition switch is turned off

4. Customization Function

   
   

   • In the settings screen of cruise information mode, pressing and holding the DISP switch enters setting mode.

   • Press the DISP switch briefly to select the item to be customized. Press and hold the DISP switch to confirm the selection.

   

   Text in Illustration

   *a	Language Setting	*b	Eco Driving Indicator Light ON/OFF Setting
   	DISP switch pressed briefly.		DISP switch pressed and held.
   	If the vehicle has reached a speed of 8 km/h (5 mph)	-	-

   
   

   • In setting mode, the following items of the combination meter assembly can be customized.

   Item	Available Setting
   Language	English French*1 Spanish*1 Russian*2
   Eco Driving Indicator Light and Instantaneous Fuel Consumption Gauge	On Off

   
   

   • *1: Except models for Russia

   • *2: Models for Russia

5. Warning Mode Function

   
   

   • When a warning is necessary, the warning display interrupts the display in the multi-information display.

   • The master warning light may illuminate or blink and the buzzer in the combination meter assembly may sound depending on the item in the multi-information display.

   Priority	Indication/Warning	Master Warning Light	Buzzer
   1	Door Open (While Driving)*1	Blinks	Sounds
   	Door Open	-	-
   	Clearance Sonar Obstruction Detection*2	-	-
   	CHECK SONAR*2	Illuminates	Sounds
   	CLEAN SONAR*2	Illuminates	Sounds
   2	AUTO POWER OFF TO CONSERVE BATTERY	-	-
   3	SHIFT TO P POSITION*3	Blinks	Sounds
   4	RELEASE PARKING BRAKE	Blinks	Sounds
   	KEY NOT DETECTED*3	Blinks	Sounds
   5	CHECK ENTRY & START SYSTEM*3	Blinks	Sounds
   6	CHECK CRUISE CONTROL SYSTEM*4	Illuminates	Sounds
   7	TURN POWER OFF*3	Blinks	Sounds
   	KEY DETECTED IN VEHICLE*3	Blinks	Sounds
   	TURN LIGHTS OFF	Blinks	Sounds
   	MOONROOF OPEN*5	Blinks	Sounds
   	DEPRESS BRAKE PEDAL, TOUCH ENGINE SWITCH TO START*3	Blinks	Sounds
   	DEPRESS BRAKE PEDAL AND PUSH ENGINE SWITCH TO START*3	Blinks	Sounds
   	SHIFT TO P POSITION TO START*3	Blinks	Sounds
   8	STEERING LOCK ACTIVE	Blinks	Sounds
   9	KEY BATTERY LOW*3	Illuminates	Sounds
   10	POWER ON*3	-	-
   	Engine start ready state*3	-	-

   
   

   • *1: If the vehicle has reached a speed of 5 km/h (3 mph).

   • *2: Models with Toyota parking assist-sensor system

   • *3: Models with smart entry and start system

   • *4: Models with cruise control system

   • *5: Models with sliding roof system