INTAKE SYSTEM DETAILS


  1. CONSTRUCTION


    1. Air Cleaner Assembly


      1. A nonwoven fabric type air cleaner filter element is used.

        A01FCFSE01
        Text in Illustration
        *1 Intake Mass Air Flow Meter Sub-assembly *2 Air Cleaner Cap Sub-assembly
        *3 Air Cleaner Filter Element Sub-assembly (Nonwoven Fabric) *4 Air Cleaner Inlet Assembly
        *5 Air Cleaner Case Sub-assembly - -

    2. Throttle Body with Motor Assembly


      1. A linkless type throttle body with motor assembly in which the throttle position sensor and the throttle actuator are integrated is used. It realizes excellent throttle valve control.

      2. The throttle control motor uses a DC motor with excellent response and minimal power consumption. The ECM performs duty ratio control of the direction and the amperage of the current that flows to the throttle actuator in order to regulate the throttle valve angle.

      3. The throttle valve shaft of the throttle body has been flattened to increase the size of the throttle valve opening.

        A01FCTXE01
        Text in Illustration
        *1 Throttle Control Motor *2 Throttle Position Sensor

    3. Intake Manifold


      1. The intake manifold is made of plastic to reduce its weight and the amount of heat transferred from the cylinder head sub-assembly. As a result, the intake air temperature is reduced and the intake volumetric efficiency is improved.

      2. A resonator is installed inside the air intake chamber to improve torque in the mid-speed range.

      3. A throttle body mesh is used between the throttle body and the intake manifold to improve the flow of air within the intake manifold.

      4. An intake manifold cover is used on the intake manifold to reduce intake air noise.

        A01FCPGE01
        Text in Illustration
        *1 Mesh Type Gasket (Throttle Body Gasket) *2 Intake Manifold Cover
        *3 Resonator - -
        *a To Intake Port - -
        A01FD5X Intake Air - -