DRIVE SHAFT SYSTEM GENERAL


  1. OUTLINE


    1. Front Drive Shaft (AWD Models)


      1. A tripod type Constant-Velocity Joint (CVJ) is used on the differential side, and a Rzeppa type CVJ is used on the wheel side.

        A01FC1VE01
        Text in Illustration
        *1 Tripod Type CVJ *2 Rzeppa Type CVJ
        *a Right Hand *b Left Hand
        A01FCE5 Front Differential Side A01FC3K Wheel Side

    2. Rear Drive Shaft


      1. A cross groove type Constant-Velocity Joint (CVJ) is used. Also, a hollow shaft is used, thus simultaneously ensuring rigidity and achieving weight reduction.

      2. A type that couples directly to the differential is used for weight reduction.

        A01FCDOE01
        Text in Illustration (Models with 2GR-FSE Engine:)
        *1 Cross Groove Type CVJ - -
        A01FCE5 Rear Differential Side A01FC3K Wheel Side
        A01FBP6E01
        Text in Illustration (Models with 4GR-FSE Engine:)
        *1 Cross Groove Type CVJ - -
        A01FCE5 Rear Differential Side A01FC3K Wheel Side