CAUTION LABEL ATTACHMENT POSITION
-
After using a degreasing agent to clean the surfaces of the body where the caution labels will be attached, attach the caution labels to the positions shown in the illustration.
Tech Tips
-
Make sure the caution label is not attached over a spot weld.
-
When attaching the caution label, make sure not to touch the label's adhesive surface.
-
To prevent the edges of the caution label from peeling, apply extra pressure to the label's periphery.
-
If the work area's temperature is 5°C or less, the caution label's adhesive will deteriorate. It is recommended that you heat the label to 20 to 40°C.
-
| *A | for LHD | - | - |
| *1 | HV BATTERY CAUTION LABEL | *2 | ENGINE CAUTION LABEL |
| *3 | EMISSION CONTROL INFORMATION LABEL (PHILIPPINES) | *4 | HV ENGINE CAUTION LABEL (PHILIPPINES) |
| *5 | HV ENGINE CAUTION LABEL | *6 | FAN CAUTION LABEL |
| *7 | LLC MAINTENANCE LABEL | *8 | AIR CONDITIONER CAUTION LABEL |
| *9 | FUEL LABEL | - | - |
| *A | for LHD | *B | LH Side |
| *C | RH Side | - | - |
| *1 | SIDE AIRBAG CAUTION LABEL | *2 | TIRE PRESSURE INFORMATION LABEL |
| *3 | NAME LABEL | - | - |
| *A | for RHD | - | - |
| *1 | HV BATTERY CAUTION LABEL | *2 | ENGINE CAUTION LABEL |
| *3 | HV ENGINE CAUTION LABEL | *4 | FAN CAUTION LABEL |
| *5 | LLC MAINTENANCE LABEL | *6 | AIR CONDITIONER CAUTION LABEL |
| *7 | FUEL LABEL | - | - |
| *A | for RHD | *B | LH Side |
| *C | RH Side | - | - |
| *1 | SIDE AIRBAG CAUTION LABEL | *2 | NAME LABEL |
| *3 | TIRE PRESSURE INFORMATION LABEL | *4 | COMPLIANCE PLATE (AUSTRALIA) |