REAR FLOOR SIDE MEMBER CUT AND JOIN REPLACEMENT SECTIONS

A0025IV


  1. REMOVAL

    Symbol Meaning
    A002563 Remove Weld Points
    A0025AX Remove Weld Points
    A0025I7 Cut and Join Location
    A0025BKC01
    *A LH - -
    *a 60 mm (2.36 in.) - -
    A00259ZC01
    *A RH - -
    *a 60 mm (2.36 in.) - -

  2. INSTALLATION

    Symbol Meaning
    A0025D7 Plug Weld
    A0025EP Plug Weld
    A0025BS Butt Weld

      INSTALLATION POINT

    1. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

    2. After welding the rear floor side member reinforcement sub-assembly rear to the vehicle side, install the rear floor side panel sub-assembly.

    3. After welding, apply body sealer and undercoating to the corresponding parts. (See the painting / coating)

    4. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

    A0025F5C01
    *A LH - -
    *1 REAR FLOOR SIDE PANEL SUB-ASSEMBLY *2 REAR FLOOR SIDE MEMBER REINFORCEMENT SUB-ASSEMBLY REAR
    A0025BAC01
    *A RH - -
    *1 REAR FLOOR SIDE PANEL SUB-ASSEMBLY *2 REAR FLOOR SIDE MEMBER REINFORCEMENT SUB-ASSEMBLY REAR