REAR FLOOR SIDE MEMBER CUT AND JOIN REPLACEMENT SECTIONS

A001ZTV


  1. REMOVAL

    Symbol Meaning
    A00206N Remove Weld Points
    A00205Y Remove Weld Points
    A00200Q Cut and Join Location
    A001ZWKC01
    *A LH - -
    *a 60 mm (2.36 in.) - -
    A00205SC01
    *A RH - -
    *a 60 mm (2.36 in.) - -

  2. INSTALLATION

    Symbol Meaning
    A00200M Plug Weld
    A001ZVD Plug Weld
    A00201N Butt Weld

      INSTALLATION POINT

    1. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

    2. After welding the rear floor side member reinforcement sub-assembly rear to the vehicle side, install the rear floor side panel sub-assembly.

    3. After welding, apply body sealer and undercoating to the corresponding parts. (See the painting / coating)

    4. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

    A001ZXKC01
    *A LH - -
    *1 REAR FLOOR SIDE PANEL SUB-ASSEMBLY *2 REAR FLOOR SIDE MEMBER REINFORCEMENT SUB-ASSEMBLY REAR
    A002062C01
    *A RH - -
    *1 REAR FLOOR SIDE PANEL SUB-ASSEMBLY *2 REAR FLOOR SIDE MEMBER REINFORCEMENT SUB-ASSEMBLY REAR