ROCKER PANEL CUT AND JOIN REPLACEMENT SECTIONS (SMALL AREAS)

A001ZW5

  1. REMOVAL

    Symbol Meaning
    A00206N Remove Weld Points
    A00200Q Cut and Join Location
    A001ZZ5 Cut Location for Supply Parts

      REMOVAL POINT

    1. *a in the illustration indicates the laser screw welding location.

    A001ZTJC01
    *b 130 mm (5.12 in.) - -
    A00203C Laser Screw Welding - -

  2. INSTALLATION

    Symbol Meaning
    A00200M Plug Weld
    A00201N Butt Weld

      INSTALLATION POINT

    1. Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

    2. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

    3. *a in the illustration indicates the laser screw welding location.

    4. After welding, apply body sealer to the corresponding parts. (See the painting / coating)

    5. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

    A001ZZSC01
    *1 CENTER BODY PILLAR OUTER - -
    A00203C Laser Screw Welding - -