RADIATOR SUPPORT ASSEMBLY REPLACEMENT

A001ZVH

  1. REMOVAL

    Symbol Meaning
    A00206N Remove Weld Points

      REMOVAL POINT

    1. *a in the illustration indicates the bolts.

    2. Perform the replacement with the A attached to the vehicle.

    3. If the A is damaged, replace the A.

    A002018N01
    A001ZVIC01
    *A LH Side - -
    A00205WC01
    *A RH Side - -

  2. INSTALLATION

    Symbol Meaning
    A00200M Plug Weld

      INSTALLATION POINT

    1. Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

    2. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

    3. *a in the illustration indicates the bolts.

    4. After removing and installing the millimeter wave radar sensor assembly, perform the necessary adjustments.

    5. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

    6. Measure the dimensions before installing the headlights.

    A001ZTUC01
    *1 RADIATOR SUPPORT SUB-ASSEMBLY UPPER *2 RADIATOR SUPPORT SUB-ASSEMBLY
    *3 FRONT CROSS MEMBER SUB-ASSEMBLY *4 FRONT BUMPER MOUNTING REINFORCE SUB-ASSEMBLY
    A002042 N*m (kgf*cm, ft.*lbf): Specified torque - -
A001ZWRC01
*A LH Side - -
A00203DC01
*A RH Side - -
A001ZW3